No search results available

Cart

request_cart.name
No search results available

Spacers

Filter

Loading...

Spacers and distance sleeves

Plastic and metal spacers from emico

The name says it all: spacer sleeves are used when it is important to maintain a constant and permanent distance in industry and in mechanical and plant engineering - between components or circuit boards, for bridging or screw connections. Also known as spacers or distance rolls, spacer sleeves are usually tubes, rolls or plates made from a wide variety of materials, depending on the requirements and location. The spacers available from emico are made of various plastics or brass. Both have their advantages and which one is right for your installation requirements varies depending on, for example, the strength requirements or whether thermal loads or other external influences are to be expected. Important properties of spacer sleeves are therefore, for example, rust-free, temperature-resistant, anti-magnetic, acid-resistant and generally mechanically resilient. Below you will find an overview of the versions available in the emico online shop. Our team of experts will be happy to advise you on choosing the right spacer. You can also request free samples.

Spacers made of PA/POM

PA is characterised above all by the fact that it is particularly wear-resistant and tough and is therefore ideal for spacer sleeves. POM also has greater dimensional stability as it absorbs less moisture. It is also a good electrical insulating material. At emico, you will find spacer sleeves made of PA/POM in over 180 different sizes - varying in height, inner diameter and outer diameter.

Spacers made of PA

The emico spacers of robust PA are available in 13 different outer diameters, including a wide range of inner diameters and heights, and in the colours black, natural and white.

Spacers made of PA-GV

The reinforcement of the PA with glass fibre (GV) makes these spacers even more dimensionally stable and increases their service life in heavy-duty use. In addition, the spacers of PA-GV are temperature-resistant up to approx. +110°C. Choose from ten different outer diameters with a large number of sub-variants in terms of inner diameter and height.

Spacers made of brass

If you are looking for metal spacers, we recommend our selection of brass spacer sleeves. Nickel-plated as standard, these are available in five different outer diameters in several variants, but you can also request other dimensions and materials from emico.

Retaining spacers

Made of solid PA 6.6, this version of the spacer has an additional anti-loss device on the inside of the tube.

Spacers with sinking

In the emico online shop, you can choose between spacer sleeves with countersink and chamfer on one or both sides. Made of temperature-resistant PA-GV (up to +110°C) and in the colour black, the spacers are available in many different sizes.

Saddle washers

This special form of spacer sleeve is made of self-lubricating polyamide and is therefore ideal as a connecting element for pivot points on machines. The emico team will be happy to help you select the right spacers for your requirements. We can also provide you with free samples - contact us, we look forward to receiving your enquiry!